PTFE HOSE / SERIES
8Д0.447.018
74° cone fittings
Technical drawing
Open full-size drawing ↗
Technical specifications
Dimensions in millimetres. Symbols correspond to the drawing; DN is the nominal diameter.
Swipe the table to see all dimensions and pressure values.
| Designation | Dimensions, mm | Pressure, MPa (kgf/cm²) | ||||||
|---|---|---|---|---|---|---|---|---|
| DN | D | d | d1 | d2 | l | S | ||
| 8Д0.447.018-20 | 6 | 25.4 | M14×1.5 | 10.6 | 4.6 | 10 | 22 | 10 (100) |
| 8Д0.447.018-30 | 8 | M16×1.5 | 12.5 | 6 | 11 | |||
| 8Д0.447.018-40 | 10 | 31.2 | M20×1.5 | 15.5 | 8 | 13 | 27 | |
| 8Д0.447.018-50 | 12 | 34.6 | M22×1.5 | 17.5 | 10 | 30 | ||
| 8Д0.447.018-60 | 14 | M24×1.5 | 19.3 | 12 | 14 | 30 | 6.5 (65) | |
| 8Д0.447.018-70 | 16 | 41.6 | M27×1.5 | 22.3 | 14 | 14 | 36 | |
| 8Д0.447.018-80 | 20 | 47.4 | M33×2 | 27.6 | 18 | 17 | 64 | |
| 8Д0.447.018-90 | 25 | 53.1 | M39×2 | 33.6 | 23 | 17.5 | 46 | |
Source table note
The source lists S = 64 mm for 8Д0.447.018-80. This value is reproduced unchanged and requires confirmation.
Drawing and reference dimensions: UralProm — 8Д0.447.018 ↗. Values are reproduced from the source; confirm the required configuration and operating limits with LLETALL when ordering.